|
Wheel Size
| 29" |
|
Bike Type
| Enduro MTB |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Carbon |
|
Electric
| no |
|
Frame
| SuperFoxy 29 Stealth Air full Carbon, Zero Suspension System, 160mm travel, Forward Geometry, Carbon Monoblock upper link, SuperBoost 12x157mm rear axle, tapered head tube, 73mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. Geometry kit included, Ring: 32T, CNC-machined alloy, X-SYNC 2, Derailleur hanger: Mondraker M071, Rings: 32T, CNC-machined alloy, X-SYNC 2 |
|
Frame Material
| Carbon |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose. | S: 380mm, M: 420mm, L: 470mm, XL: 510mm |
|
Front Suspension
| Fox 38 29 Float FIT GRIP2 EVOL Factory Kashima, 170mm, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: high and low-speed compression, high and low-speed rebound, air preload |
|
Front Suspension Travel
| 170 |
|
Shock
| Öhlins TTX Air 205X62.5 mm, Settings: high speed compression lever with climb mode, low-speed compression, rebound, air preload, Trunnion top mount, 22.2X10mm bottom bushings, Settings: CO2 compression, R35 rebound |
|
Rear Suspension Travel
| 205 |
|
Suspension Layout
| Full Suspended |
|
Headset
| Onoff Titan tapered for 1-1/8†to 1-1/2†head tube, ACB sealed bearings, top 41.8x30.5x8x45ºx45º, bottom 51.9x40x8x45ºx45º |
|
Front Hub
| e thirteen Boost 15x110mm, triple-sealed, fully machined aluminum, IS 6 bolts |
|
Rear Hub
| e thirteen Superboost 12x157mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, XD freehub |
|
Hub Spacing
| Front: 110mm Boost;
Rear: 157mm Super Boost |
|
Rims
| e thirteen LG1 Plus Enduro, IW30 Hookless, 6069 Welded Aluminum, 30mm internal width, tubeless ready, 28 spokes |
|
Spokes
| e thirteen custom Hive triple-butted black alloy, alloy nipples, nipple washers |
|
Inflation Type
| Tubeless |
|
Tyres
| Front: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead; Rear: Maxxis Minion DHR II 29x2.4 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead |
|
Brakeset
| Sram Code RSC, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads, Lever: Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjust |
|
Shifters
| Sram Trigger X01 Eagle, 12s, X-Actuation 1:1 |
|
Rear Derailleur
| Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1 |
|
Crankset
| Sram X01 Carbon Eagle, SuperBoost, DUB axle, Direct mount chain ring, S/M size: 170mm, L/XL size: 175mm |
|
Bottom Bracket
| Sram DUB BSA, sealed bearings, 73mm |
|
Cassette
| Sram XG-1275, 10-52T, 12s |
|
Chain
| Sram GX Eagle, 12s, Powerlock |
|
Pedals
| Not Included |
|
Power Meter
| No |
|
Saddle
| SDG BEL-AIR 3.0, EVA foam, Alloy rails |
|
Seatpost
| Fox Transfer Factory Kashima internal, diameter 31.6mm, S size: 363.5x125mm, M/L size: 418.3x150mm, XL size: 475.1x175mm |
|
Stem
| Onoff Krypton FG 30mm, 6061 forged alloy, 31.8mm barbore |
|
Handlebar
| Onoff Kripton Carbon 0.5, rise: 12,5mm, width: 780mm, 9º backsweep, 5º upsweep, 31.8mm barbore |
|
Grips
| Onoff Desert, 1lock-on, 135mm, sizes: S/M L/XL |
|
Belongs to MY Catalog
| 2021 |