|
Wheel Size
| 29" & 29"-27.5" |
|
Bike Type
| Downhill MTB |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Carbon |
|
Electric
| no |
|
Frame
| Summum Carbon Stealth Air full Carbon, Zero Suspension System, 200mm travel, Forward Geometry, Carbon Monoblock upper link, SuperBoost 12x157mm rear axle, 83mm BSA bottom bracket, HHG internal cable routing, MAX. capacity dual row Enduro bearings, shock mudguard, ISCG 05, custom frame protectors. *Geometry kit included. |
|
Frame Material
| Carbon |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose. | S, M, L, XL |
|
Size Notes
| S / M / L / XL 29" and MX |
|
Front Suspension
| Fox 40 29 Float FIT GRIP2 EVOL Factory Kashima, 203mm, air spring, 1-1/8” steerer tube, 20x110mm axle, offset 56mm. Settings: high and low-speed compression, high and low-speed rebound, air preload |
|
Front Suspension Travel
| 203 |
|
Shock
| Fox DHX2 Factory Kashima, 225x70mm. Settings: high and low-speed compression, high and low-speed rebound, spring preload. Super light steel (SLS) spring. Trunnion top mount, 30x8mm bottom bushings |
|
Rear Suspension Travel
| 200 |
|
Suspension Layout
| Full Suspended |
|
Headset
| ONOFF Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45ºx45º ACB sealed bearings, geometry kit cups, external diameter 56mm |
|
Front Hub
| e*thirteen Boost 20x110mm, triple-sealed, fully machined aluminum, IS 6 bolts |
|
Rear Hub
| e*thirteen Superboost 12x157mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts |
|
Hub Spacing
| Front: 110mm Boost;
Rear: 157mm Super Boost |
|
Rims
| e*thirteen LG1 Race Carbon, IW30 29" Hookless, World Cup carbon fiber, 30mm internal width, tubeless ready, 32 spokes |
|
Spokes
| e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers |
|
Inflation Type
| Tubeless |
|
Tyres
| Front tire: Michelin DH34 29x2.4, tubeless ready, Magi-X DH compound, double-reinforced DH shield casing, wire bead
Rear tire: Michelin DH34 29x2.4, tubeless ready, Magi-X DH compound, double-reinforced DH shield casing, wire bead |
|
Brakeset
| Shimano Saint M820, 4-piston caliper, RT86 203mm 2-piece IS 6 bolts rotor with ICE technology, resin pads with cooler w/brakelever Shimano Saint, ergonomic antiskid lever with servo wave, free stroke and tool less reach adjust |
|
Shifters
| Shimano Saint SL-M820 10s, low friction multi bearing, instant release, multi release, 2-way release |
|
Front Derailleur
| E.13 Vario Compact Upper Slider ,Alloy backplate ,DMB (Direct mount Bashguard) Lower Slider 34-36t, ISCG 05 adjustable upper slider |
|
Rear Derailleur
| Shimano Saint RD-M820-SS, 10s, Shadow+, short cage |
|
Crankset
| Shimano Saint M825 Hollowtech II, reinforced steel axle, 165mm w/chainrings 36T, aluminum, BCD 104 |
|
Bottom Bracket
| Shimano 83mm |
|
Cassette
| Shimano CS-HG500-10, 11-25T, 10s |
|
Chain
| Shimano HG95, 10s |
|
Pedals
| Not Included |
|
Power Meter
| No |
|
Saddle
| SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides |
|
Seatpost
| SDG Micro I-Beam SP-951 Carbon, diameter 31.6mm, length 300mm, micro-adjustment |
|
Stem
| Onoff Krypton DH CNC Integrated FG, 25-30mm adjustable length, 31.8mm barbore, 6061 alloy, 2x6mm spacer |
|
Handlebar
| Renthal Fatbar series 7 alloy, rise: 30mm, width: 800mm, 7º backsweep, 5º upsweep, 31.8mm barbore |
|
Grips
| Renthal, double lock-on, kevlar compound, 130mm |
|
Belongs to MY Catalog
| 2023 |