|
Wheel Size
| 29"-27.5" |
|
Bike Type
| Downhill MTB |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Aluminium |
|
Electric
| no |
|
Frame
| M5 alloy, Style-Specific DH Geometry, horst pivot flip chip for 27.5 or 29 rear wheel, BSA threaded BB, full internal cable routing with option for full external brake, 148mm rear spacing, sealed cartridge bearing pivots, replaceable derailleur hanger, 200mm of travel |
|
Frame Material
| Aluminium |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose.
| S2,S3,S4 |
|
Front Suspension
| RockShox BoXXer Ultimate 29, Charger 2.1 Damper, DH DebonAir spring, short crown, 20x110mm thru-axle, 56mm offset, 200mm of travel |
|
Front Suspension Travel
| 200 |
|
Shock
| RockShox Super DeLuxe Ultimate DH Coil, external low speed compression, external rebound adjust, Trunnion mount, 225x75 |
|
Rear Suspension Travel
| 225 |
|
Suspension Layout
| Full Suspended |
|
Headset
| NA |
|
Front Hub
| Alloy, sealed cartridge bearings, 20x110mm, 28h |
|
Rear Hub
| DT Swiss 350, SRAM XD freehub, 6-bolt disc, high-low flange, sealed cartridge bearings, 12x148mm spacing, 28h |
|
Hub Spacing
| Front: 110mm Boost;
Rear: 148mm Boost |
|
Rims
| Roval Alloy DH, 29 front, 27.5 rear, 28mm internal width, 28h, tubeless ready |
|
Spokes
| DT Swiss Competition, stainless steel, 14g |
|
Inflation Type
| Inner Tube |
|
Tyres
| Front Tyre: Butcher BLCK DMND, 29x2.3"; Rear Tyre: Butcher BLCK DMND, 27.5x2.3" |
|
Tubes
| Standard, Presta Valve |
|
Brakeset
| Front Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm; Rear Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm |
|
Shifters
| SRAM X01 DH, trigger, 7-speed |
|
Rear Derailleur
| SRAM X01 DH, 7-speed, trigger |
|
Crankset
| Crankset: SRAM X01 DH, DUB, carbon, Direct mount ring, 165mm; Chainrings: 34T |
|
Bottom Bracket
| SRAM DUB, 83mm |
|
Cassette
| SRAM X01 DH, 7-speed, 10-24t |
|
Chain
| Sram PC1130 w/ Powerlink, 11-speed |
|
Pedals
| NA |
|
Power Meter
| No |
|
Saddle
| Body Geometry Henge DH, hollow titanium rails, 130mm |
|
Seatpost
| Thomson, alloy, straight, 12-degree clamp |
|
Stem
| Descendant 35mm Direct Mount Stem, 50mm length |
|
Handlebar
| Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm |
|
Grips
| Grips: Deity, Knuckleduster, Black; |
|
Belongs to MY Catalog
| 2021 |