|
Wheel Size
| 26" |
|
Bike Type
| Cross Country MTB |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Aluminium |
|
Electric
| no |
|
Frame
| Specialized A1 Premium Aluminum, fully butted, formed TT, Double ORE DT, externally relieved HT, reinforced disc mount, forged dropouts w/ replaceable hanger, disc only |
|
Frame Material
| Aluminium |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose. | 13",15",17",19",21",23" |
|
Front Suspension
| SR Suntour SF10-XCT-V2D-MLO, 80mm, 1pc. alloy lower, 28mm Hi-Ten stanchions, mechanical LO, coil/mcu spring w/ preload adj., size-specific spring rates, spring assisted seals, disc only |
|
Front Suspension Travel
| 80 |
|
Suspension Layout
| Front Suspended |
|
Headset
| 1-1/8" threadless, loose ball |
|
Front Hub
| Forged alloy, hi/low flange, double sealed, ground race, machined disc mount, 32h |
|
Rear Hub
| Forged alloy, double sealed, ground race, machined disc mount, cassette, 32h |
|
Hub Spacing
| Front: 100mm;
Rear: NA |
|
Rims
| Alex RHD, 26"", pinned, alloy double wall, 32h front and rear |
|
Spokes
| 2mm (14g) stainless |
|
Tyres
| Front Tyre: Specialized Fast Trak LK Sport, 26x2.0"", 60TPI, wire bead; Rear Tyre: Specialized Fast Trak LK Sport, 26x2.0"", 60TPI, wire bead |
|
Tubes
| Schraeder valve |
|
Brakeset
| Front Brake: Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor; Rear Brake: Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor |
|
Shifters
| SRAM X4-R trigger |
|
Front Derailleur
| Shimano Altus, 34.9mm clamp |
|
Rear Derailleur
| SRAM X-4, mid cage |
|
Crankset
| Crankset: SR SunTour, Octalink spline; Chainrings: 42S x 32S x 22S replaceable |
|
Bottom Bracket
| Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm |
|
Cassette
| SRAM PG-820, 8-speed, 11-32t |
|
Chain
| KMC X8 w/ reuseable Missing Link |
|
Pedals
| Steel cage, composite body, 9/16"" |
|
Power Meter
| No |
|
Saddle
| Specialized XC, Body Geometry, 143mm width, front and rear bumpers |
|
Seatpost
| Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm |
|
Stem
| 3D forged alloy, 10 degree rise, 25.4mm clamp |
|
Handlebar
| Alloy riserbar, 25mm rise, 640mm wide, 8 degree back sweep, 7 degree up sweep |
|
Grips
| Specialized Enduro, dual compound Kraton, no flange, 131mm; |
|
Belongs to MY Catalog
| 2010 |