|
Wheel Size
| 26" |
|
Bike Type
| Cross Country MTB |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Aluminium |
|
Electric
| no |
|
Frame
| Specialized A1 Premium aluminium, fully butted, formed TT, Double ORE DT, externally relieved HT, reinforced disc mount, forged dropouts w/ replaceable hanger, disc only |
|
Frame Material
| Aluminium |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose. | 15.5",17.5",19",21",23" |
|
Front Suspension
| SR Suntour SF11-XCR-DS-26-LO-SP, 80mm, 1pc. alloy lower, 30mm steel stanchions, hyd. damping w/ mic-tuned spike valve & LO |
|
Front Suspension Travel
| 80 |
|
Suspension Layout
| Front Suspended |
|
Headset
| 1-1/8" threadless, loose ball |
|
Front Hub
| Forged alloy, hi/low flange, double sealed, ground race, machined disc mount and flange, QR, 32h |
|
Rear Hub
| Forged alloy, mid flange, double sealed, ground race, machined disc mount and flanges, cassette, QR, 32h |
|
Hub Spacing
| Front: 100mm;
Rear: NA |
|
Rims
| Alex RHD 26", alloy double wall, pinned w/eyelets, 32h |
|
Spokes
| 2mm (14g) stainless |
|
Tyres
| Front Tyre: Specialized Fast Trak LK Sport, 26x2.0", 60TPI, wire bead; Rear Tyre: Specialized Fast Trak LK Sport, 26x2.0", 60TPI, wire bead; |
|
Tubes
| Schraeder valve |
|
Brakeset
| Front Brake: Shimano BR-M445 hydraulic disc brake, dual piston, 160mm rotor; Rear Brake: Shimano BR-M445 hydraulic disc brake, dual piston, 160mm rotor |
|
Shifters
| Shimano Alivio SL, 9sp rapid fire trigger |
|
Front Derailleur
| Shimano Alivio, 34.9mm clamp, top swing, dual pull |
|
Rear Derailleur
| Shimano Alivio, 9sp, long cage |
|
Crankset
| Crankset: Shimano FC-M430C-8, Octalink spline; Chainrings: 44S x 32S x 22S, w/ chainguard |
|
Bottom Bracket
| Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm |
|
Cassette
| Shimano HG50, 9-speed, 11-34t |
|
Chain
| KMC X9 w/ reusable Missing Link |
|
Pedals
| Alloy 1pc. body and cage, reflector kit, 9/16" |
|
Power Meter
| No |
|
Saddle
| Specialized XC, Body Geometry, 143mm width, front and rear bumpers |
|
Seatpost
| Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm |
|
Stem
| 3D forged alloy, 4 bolt, 7 degree rise, 31.8mm clamp |
|
Handlebar
| Butted alloy riserbar, 25mm rise, 8 degree back sweep, 6 degree up |
|
Grips
| Specialized Enduro, dual compound Kraton, no flange, 131mm; |
|
Belongs to MY Catalog
| 2011 |