|
Wheel Size
| 26" |
|
Bike Type
| Dirt & Slopestyle Bike |
|
Brake Type
| Disc |
|
Telescopic Dropper
| No |
|
Material
| Steel |
|
Electric
| no |
|
Frame
| P. Series Reynolds 520 Cr-Mo, double-butted TT/DT, externally relieved HT, disc mount, 6mm offset horizontal drop out w/ integrated tensioner system, replaceable alloy der hanger, disc only |
|
Frame Material
| Steel |
Size  If you are on a listing page, in this field you will find all the available sizes for that specific product. If you are instead on an ad page, this field reports the Size of the spedific product that is for sale. The Size is one of the most important information for choosing the best fitting product to your body. Wehtere it is a bicycle or gear. Speaking about bike clothing and shoes, sizes follow the international size charts, but when it comes to bicycles and frames it is not possible to define a standard. Bicycles and frames come in many different shapes and geometries and this results in several sizing methods. As a general rule, though, you can assume that road bicycles are sized by the lenght the seat tube in centimeters (52, 54, 56, ...) and mountain bikes are instead sized by the S,M,L, ... rule. Our advice, is to look carefully at the sizing chart you can find in our product pages, but to be sure you are choosing the best fit for you, always refer to your trusted dealer or shop, because he is the one who is the one who can assist you at best for this purpose. | Long |
|
Front Suspension
| Marzocchi DJ3, 80mm, Cr-Mo steerer, 32mm Cr-Mo stanchions, magnesium lower, cold forged crown, fixed rate damping, coil/mcu w/ preload adj., ""stiff"" spring |
|
Front Suspension Travel
| 80 |
|
Suspension Layout
| Front Suspended |
|
Headset
| Integrated cartridge bearing, Campy type, 1-1/8" threadless |
|
Front Hub
| Forged alloy, machined high/low flange and disc mount, ground race, 36h, nutted 3/8"" axle |
|
Rear Hub
| Forged alloy cassette, machined flanges and disc mount, double sealed, ground race, 36h, nutted 3/8"" axle |
|
Hub Spacing
| Front: 100mm;
Rear: NA |
|
Rims
| P.Disc AM, double wall disc w/ eyelets, 36h |
|
Spokes
| 2mm (14g) stainless |
|
Tyres
| Front Tyre: Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead; Rear Tyre: Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead |
|
Tubes
| Schraeder valve |
|
Brakeset
| Front Brake: Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor; Rear Brake: Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor |
|
Shifters
| SRAM X4-R 8sp trigger |
|
Rear Derailleur
| SRAM X-5, short cage |
|
Crankset
| Crankset: Fuse tubular heat treated Cr-Mo 2pc w/ hollow 19mm spindle; Chainrings: 34A w/ poly bash guard and Specialized ISCG chain guide |
|
Bottom Bracket
| Threaded Euro, alloy cups, 4x cartridge bearing, alloy spacers |
|
Cassette
| SRAM PG-830, 8-speed, 11-28t |
|
Chain
| KMC X8 w/ reuseable Missing Link |
|
Pedals
| SBC Lo-A1, Alloy platform w/ removable pins, 9/16"" |
|
Power Meter
| No |
|
Saddle
| Specialized Fuse Lo Pro, 8mm rails, PVC bumpers front and rear |
|
Seatpost
| Alloy two bolt, no offset, micro adjust, 25.4mm |
|
Stem
| SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length |
|
Handlebar
| Alloy riser bar, 55mm rise, 680mm wide, 8 degree back sweep, 7 degree up |
|
Grips
| Fuse BMX, single compound, closed end, 140mm; |
|
Belongs to MY Catalog
| 2010 |